Quick Start#
For installation instructions see Installation.
In principle, PyPSA networks can be assigned with
import pypsa
import numpy as np
network = pypsa.Network()
Components like buses can be added with pypsa.Network.add()
.
#add three buses
n_buses = 3
for i in range(n_buses):
network.add("Bus", "My bus {}".format(i), v_nom=20.)
The same counts for lines, generators and loads, see the list of all components Components.
#add three lines in a ring
for i in range(n_buses):
network.add("Line", "My line {}".format(i),
bus0="My bus {}".format(i),
bus1="My bus {}".format((i+1)%3),
x=0.1,
r=0.01)
#add a generator at bus 0
network.add("Generator", "My gen",
bus="My bus 0",
p_set=100,
control="PQ")
#add a load at bus 1
network.add("Load", "My load",
bus="My bus 1",
p_set=100,
q_set=100)
Note that fixed values of active and reactive power are set with p_set
and q_set
respectively. After initializing, there are plenty of options what you can do with your network. The examples section gives a broad overview.
Basic Examples#
Two more basic examples are given in the following notebooks:
Find many more extensive examples in the Examples section. Also have a look on the User Guide section.